HTS Code 820291: Straight saw blades, for working metal: — 2026 US Tariff Rates
Quick Answer
HTS 820291 = Straight saw blades, for working metal:
Duty rate: Free · Unit: 82-digit · Column 1: Free
Complete Classification Table
All 8-digit and 10-digit tariff codes under HTS subheading 820291. Use this table to find the correct statistical suffix and applicable duty rate for your product.
| HTS Code | Full Description | General Rate | Special Rate | Column 2 Rate |
|---|---|---|---|---|
8202.91.30.00 |
Hacksaw blades | Free | — | 20% |
8202.91.60.00 |
Other | Free | — | 40¢/gross |
Chapter 82 Frequently Asked Questions
Are electric drills classified in Chapter 82?
No. Chapter 82 covers manual (non-powered) hand tools. Electrically or pneumatically powered hand tools are classified in Chapter 84 or 85 depending on their type, so an electric drill is not a Chapter 82 article.
What duty applies to hand tools like wrenches and pliers?
Most manual hand tools such as wrenches (8204), pliers (8203), and screwdrivers (8205) carry low general duty rates, frequently Free to around 3%. Chinese-origin tools are typically subject to Section 301 List 3 (25%) duties on top of that.
Where are knives and cutlery classified?
Table knives, cutting blades, and other cutlery are classified in heading 8211–8215 of Chapter 82, including spoons and forks (8215). The classification depends on whether the knife is a table/cutlery item, a tool, or a weapon (some weapons go to Chapter 93).
Do razors and razor blades belong in Chapter 82?
Yes, razors and razor blades are classified in heading 8212. They are a high-volume consumer import, and Chinese-origin razors may be subject to Section 301 tariffs depending on the current lists and exclusions.
Are there anti-dumping duties on Chinese hand tools?
Yes. Numerous US anti-dumping orders have covered Chinese-origin tools and cutlery over the years, including certain cutlery, saw blades, and hand tools. Verify the current ADD/CVD scope for your exact product and producer before relying on the base MFN rate.
Duty Calculation Tips for HTS 820291
Chapter 82 base rates are mostly low and often duty-free for many hand tools, but the China angle dominates: Chinese-origin hand tools and cutlery are heavily covered by Section 301 List 3 (25%) tariffs, and cutlery, saw blades, and certain hand tools have a long history of US anti-dumping orders. Razors and razor blades (8212), scissors (8213), and spoons/forks (8215) are the high-volume consumer items. Since the general MFN rates are frequently 0–3%, the Section 301 and ADD/CVD component is almost always the dominant cost for importers of Chinese tools.
HTS Chapter 82 Classification Guide: Tools, Implements, Cutlery, Spoons and Forks, of Base Metal
Chapter 82 covers hand tools, implements, cutlery, and tableware made of base metal — spades, shovels, saws, pliers, wrenches, screwdrivers, drills, razors and razor blades, knives, scissors, and spoons/forks. The chapter excludes machines and mechanical appliances (which belong in Chapters 84–85 even if hand-held and powered) and excludes certain tools that are parts of larger machines. A central rule is that powered hand tools are NOT in this chapter: an electric drill is Chapter 85 or 84, while a manual wrench is Chapter 82. Interchangeable tool parts (blades, drill bits) are covered in heading 8207–8208 if they are for hand tools, but if designed as parts of machine tools they may fall in Chapter 84.
Common Misclassification Errors
- Classifying electric or pneumatic power tools under Chapter 82 — motorized hand tools belong in Chapter 84/85, Chapter 82 is for manual (non-powered) tools
- Putting interchangeable machine-tool parts (for lathes or milling machines) under 8207 when they belong in Chapter 84 as machine parts
- Classifying sports knives and hunting knives as arms (Ch 93) — most cutlery knives belong in Chapter 82 unless they are spring-loaded or fixed-blade weapons
Quick Answer: HTS 820291 Duty Rates
HTS subheading 820291 (straight saw blades, for working metal:) contains 2 sub-classifications.
2 suffixes carry duty-free General rates.
Suffix 8202.91.30.00: General rate Free.
Suffix 8202.91.60.00: General rate Free.
Always verify with CBP — Section 301, Section 232, and ADD/CVD may apply.
Importing Under HTS 820291: What Importers Ask
How do I verify the correct HTS classification before importing?
Request a binding ruling from CBP's National Commodity Specialist Division. The ruling is valid for 5 years and is binding on all CBP ports. Alternatively, consult a licensed customs broker for a classification opinion. Misclassification can result in retroactive duties and Section 592 penalties.
Can I get duty-free treatment under an FTA for this product?
Check the Special rate column on this page for FTA preferences. If a preferential rate is listed, verify your product meets the FTA's specific rules of origin. All FTAs require origin certification — USMCA, KORUS, and others have specific documentation requirements.
What documentation is required at the port of entry?
At minimum: commercial invoice, packing list, bill of lading, and CBP Form 7501 (Entry Summary). Depending on the product, additional documentation may include FTA certificate of origin, FDA prior notice, USDA phytosanitary certificate, or TSCA certification. CBP may request the foreign supplier's manufacturing records.
At a Glance
- All 2 sub-classifications under HTS 820291 are duty-free under the General rate — no tariff applies regardless of country of origin.
- This code falls under a chapter covering products classified under this chapter.
What Importers Need to Know About HTS Chapter 82
This subheading falls under an HTS chapter covering products classified under this heading of the Harmonized Tariff Schedule. Importers of these products should be aware of the following trade compliance considerations:
Importers should verify classification with CBP or a licensed customs broker. Check whether Section 301, Section 232, or anti-dumping/countervailing duties apply to your product based on country of origin and specific HTS classification.
For the specific subheading HTS 820291, we recommend you:
- Verify the correct 10-digit statistical suffix — even within a 6-digit subheading, duty rates can differ significantly between suffixes
- Check FTA eligibility — if your product qualifies for preferential treatment under USMCA, KORUS, or another FTA, you may reduce or eliminate duties by providing the required origin certification
- Monitor for trade remedy changes — Section 301, Section 232, and anti-dumping duties are updated periodically. A rate that was correct last quarter may have changed
- Consult CBP resources — for binding classification rulings, CBP's National Commodity Specialist Division provides written determinations
Official Sources
PoliteDraft recommends verifying duty rates directly with official government sources before filing import documentation.
Independent editors organize official USITC HTS data and explain how to check the exact suffix, unit, origin, and trade remedies. This site is a research reference, not a customs broker, attorney, or classification opinion.
Related HTS Codes in This Section
Trade & Compliance Insights for Chapter 82
Expert analysis on tariff policy, trade remedies, and compliance strategies relevant to HTS 820291.
Complete tariff guide for US importers of industrial machinery, electronics, and electrical equipment (HTS Section XVI, Chapters 84-85)....
Section XV Tariff Guide: Steel, Aluminum & Base Metals — 2026 HTS Import Duties, Section 232 & Anti-DumpingComplete tariff guide for US importers of steel, aluminum, copper, and base metal products (HTS Section XV, Chapters 72-83). Covers...
Browse All HTS Codes in This Section
See the complete list of HTS subheadings under the same section as 820291.
View Section Overview →<strong>Editorial note:</strong> The first listed General rate for HTS 820291 (Straight saw blades, for working metal:) is duty-free in this revision. Check every statistical suffix and the Special column for country-specific treatment before filing.