HTS Code 760711: Rolled but not further worked: — 2026 US Tariff Rates
Quick Answer
HTS 760711 = Rolled but not further worked:
Duty rate: 5.8% · Unit: 76-digit · Column 1: 5.8%
Complete Classification Table
All 8-digit and 10-digit tariff codes under HTS subheading 760711. Use this table to find the correct statistical suffix and applicable duty rate for your product.
| HTS Code | Full Description | General Rate | Special Rate | Column 2 Rate |
|---|---|---|---|---|
7607.11.30.00 |
Of a thickness not exceeding 0.01 mm | 5.8% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 40% |
7607.11.60 |
Of a thickness exceeding 0.01 mm | 5.3% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 40% |
7607.11.60.10 |
Boxed aluminum foil weighing not more than 11.3 kg | — | — | — |
7607.11.60.90 |
Other | — | — | — |
7607.11.90 |
Other | 3% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 13.5% |
7607.11.90.30 |
Body stock | — | — | — |
7607.11.90.60 |
Lid stock | — | — | — |
7607.11.90.90 |
Other | — | — | — |
HTS Chapter 76 Classification Guide: Aluminum and Articles Thereof
Chapter 76 covers aluminum from unwrought metal through semi-finished products (bars, rods, profiles, wire, plates, sheets, foil) to finished articles (tubes, fittings, castings, structures). Classification follows the product form hierarchy. Aluminum extrusions (7604) are one of the most ADD-impacted product categories in the entire HTS.
Common Misclassification Errors
- Failing to account for both Section 232 (10%) and ADD/CVD (up to 169% for Chinese extrusions) — the combined effective rate can exceed 170%
- Confusing aluminum foil (7607) with aluminum sheet (7606) — thickness determines the subheading, and duty rates differ
- Not checking for transshipment risk — CBP EAPA investigations target aluminum routed through Vietnam, Malaysia, and Thailand to evade duties
Chapter 76 Frequently Asked Questions
What is the Section 232 tariff rate on aluminum?
Section 232 imposes a 10% additional duty on most aluminum products under Chapter 76, effective since 2018. Country exemptions include Australia, Argentina (unlimited), and Canada/Mexico (USMCA). Unlike steel, aluminum has no country-specific quota arrangements — countries are either fully exempt or fully subject.
How high are anti-dumping duties on Chinese aluminum?
Chinese aluminum extrusions (7604.21-7604.29) face ADD rates of 33.28% (China-wide rate) plus Section 232 (10%), for a combined effective rate of approximately 43%. Company-specific rates vary. Other aluminum products may also face ADD — check Commerce Department orders for your specific product.
What is the USMCA melt-and-pour rule for aluminum?
Under USMCA, aluminum must be 'melted and poured' (smelted and cast) in a USMCA country to qualify for preferential rates. Simply extruding or fabricating imported aluminum ingots in Mexico or Canada does NOT confer USMCA origin. This is strictly enforced by CBP.
What is EAPA and how does it affect aluminum imports?
The Enforce and Protect Act (EAPA) authorizes CBP to investigate allegations of tariff evasion, including transshipment of Chinese aluminum through third countries. CBP has found aluminum routed through Vietnam, Malaysia, and Thailand to evade ADD/CVD and Section 232 duties. Penalties include retroactive duties and debarment.
Are aluminum cans and packaging subject to Section 232?
Most aluminum cans and packaging materials under Chapter 76 are subject to Section 232 (10% additional duty) unless specifically excluded or from an exempt country. However, finished aluminum beverage cans may fall under Chapter 73 if they are classified as containers. Check the specific HTS subheading.
What Importers Need to Know About HTS Chapter 76
This subheading falls under an HTS chapter covering aluminum and aluminum articles including unwrought aluminum, bars, rods, profiles, wire, plates, sheets, foil, tubes, and castings. Importers of these products should be aware of the following trade compliance considerations:
Aluminum products face Section 232 (10%) + potential ADD/CVD for Chinese-origin products (up to 169% for extrusions). USMCA melt-and-pour rule applies. Verify transshipment risk — CBP EAPA investigations target aluminum routed through Vietnam, Malaysia.
For the specific subheading HTS 760711, we recommend you:
- Verify the correct 10-digit statistical suffix — even within a 6-digit subheading, duty rates can differ significantly between suffixes
- Check FTA eligibility — if your product qualifies for preferential treatment under USMCA, KORUS, or another FTA, you may reduce or eliminate duties by providing the required origin certification
- Monitor for trade remedy changes — Section 301, Section 232, and anti-dumping duties are updated periodically. A rate that was correct last quarter may have changed
- Consult CBP resources — for binding classification rulings, CBP's National Commodity Specialist Division provides written determinations
Importing Under HTS 760711: What Importers Ask
How do I verify the correct HTS classification before importing?
Request a binding ruling from CBP's National Commodity Specialist Division. The ruling is valid for 5 years and is binding on all CBP ports. Alternatively, consult a licensed customs broker for a classification opinion. Misclassification can result in retroactive duties and Section 592 penalties.
Can I get duty-free treatment under an FTA for this product?
Check the Special rate column on this page for FTA preferences. If a preferential rate is listed, verify your product meets the FTA's specific rules of origin. All FTAs require origin certification — USMCA, KORUS, and others have specific documentation requirements.
What documentation is required at the port of entry?
At minimum: commercial invoice, packing list, bill of lading, and CBP Form 7501 (Entry Summary). Depending on the product, additional documentation may include FTA certificate of origin, FDA prior notice, USDA phytosanitary certificate, or TSCA certification. CBP may request the foreign supplier's manufacturing records.
Duty Calculation Tips for HTS 760711
Aluminum faces Section 232 (10%) plus potential ADD/CVD for Chinese-origin products. Chinese extrusions (7604) face the highest combined rates. The USMCA melt-and-pour rule applies to aluminum. Verify country of origin carefully — CBP EAPA investigations have found aluminum transshipped through Southeast Asia. Consider sourcing from Canada, EU, or Middle East for lower total duty burden.
Quick Answer: HTS 760711 Duty Rates
HTS subheading 760711 (rolled but not further worked:) contains 8 sub-classifications.
Suffix 7607.11.30.00: General rate 5.8%, Special (FTA): Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG).
Suffix 7607.11.60: General rate 5.3%, Special (FTA): Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG).
Always verify with CBP — Section 301, Section 232, and ADD/CVD may apply.
Duty Estimator
This page lists rates that may be ad valorem, specific, compound, or quota-based. The automatic estimator is intentionally disabled so a quantity-based rate is never mistaken for a percentage. Use the exact suffix, unit of quantity, origin, and current CBP guidance before calculating a shipment.
At a Glance
- The General duty rate for HTS 760711 is 5.8% · 8 statistical suffixes · 0 duty-free.
- 3 sub-classifications offer Special (FTA) rate preferences — check the Special column for USMCA, KORUS, and other FTA eligibility.
- This code falls under a chapter covering aluminum and aluminum articles including unwrought aluminum, bars, rods, profiles, wire, plates, sheets, foil, tubes, and castings.
Official Sources
PoliteDraft recommends verifying duty rates directly with official government sources before filing import documentation.
Independent editors organize official USITC HTS data and explain how to check the exact suffix, unit, origin, and trade remedies. This site is a research reference, not a customs broker, attorney, or classification opinion.
Related HTS Codes in This Section
Related Chapters
HTS Chapter 76 is frequently cross-referenced with the following chapters in supply chain and trade compliance workflows.
Trade & Compliance Insights for Chapter 76
Expert analysis on tariff policy, trade remedies, and compliance strategies relevant to HTS 760711.
Complete tariff guide for US importers of industrial machinery, electronics, and electrical equipment (HTS Section XVI, Chapters 84-85)....
Section XV Tariff Guide: Steel, Aluminum & Base Metals — 2026 HTS Import Duties, Section 232 & Anti-DumpingComplete tariff guide for US importers of steel, aluminum, copper, and base metal products (HTS Section XV, Chapters 72-83). Covers...
Browse All HTS Codes in This Section
See the complete list of HTS subheadings under the same section as 760711.
View Section Overview →<strong>Editorial note:</strong> The first listed General rate for HTS 760711 (Rolled but not further worked:) is 5.8%. Rates can differ by suffix, origin, and trade remedy; verify the exact line in the current USITC schedule and with CBP or a licensed customs broker.