HTS Code 721430: Other, of free-cutting steel — 2026 US Tariff Rates
Data sourced from USITC 2026 Harmonized Tariff Schedule · Last verified May 31, 2026
Quick Answer
HTS 721430 = Other, of free-cutting steel
Duty rate: Free · Unit: 72-digit · Column 1: Free
About This HTS Subheading
This 6-digit Harmonized Tariff Schedule subheading (721430) covers other, of free-cutting steel. The table below lists all 8-digit and 10-digit statistical suffixes under this subheading, including General, Special (Free Trade Agreement), and Column 2 duty rates. Data is sourced from the official USITC 2026 Harmonized Tariff Schedule Revision 9. Always verify final classifications and duty rates with US Customs and Border Protection (CBP) before importing.
Complete Classification Table
All 8-digit and 10-digit tariff codes under HTS subheading 721430. Use this table to find the correct statistical suffix and applicable duty rate for your product.
| HTS Code | Full Description | General Rate | Special Rate | Column 2 Rate |
|---|---|---|---|---|
7214.30.00 |
Other, of free-cutting steel | Free | — | 20% |
7214.30.00.10 |
Containing by weight 0.1 percent or more of lead | — | — | — |
7214.30.00.80 |
Other | — | — | — |
Duty Estimator
Enter your product value to estimate the import duty. This is an estimate only — actual duties are assessed by CBP at the port of entry.
Quick Answer: HTS 721430 Duty Rates
HTS subheading 721430 (other, of free-cutting steel) contains 3 sub-classifications.
1 suffix carry duty-free General rates.
Suffix 7214.30.00: General rate Free.
Always verify with CBP — Section 301, Section 232, and ADD/CVD may apply.
What Importers Need to Know About HTS Chapter 72
This subheading falls under an HTS chapter covering iron and steel products including ingots, slabs, flat-rolled products, bars, rods, angles, shapes, sections, wire, and semi-finished steel. Importers of these products should be aware of the following trade compliance considerations:
Steel products are subject to Section 232 national security tariffs (25% additional duty). Country exemptions: Australia, Argentina, Brazil, South Korea (quota), Canada, Mexico (USMCA). Anti-dumping duties apply to steel from China, India, Japan, Korea, and others.
For the specific subheading HTS 721430, we recommend you:
- Verify the correct 10-digit statistical suffix — even within a 6-digit subheading, duty rates can differ significantly between suffixes
- Check FTA eligibility — if your product qualifies for preferential treatment under USMCA, KORUS, or another FTA, you may reduce or eliminate duties by providing the required origin certification
- Monitor for trade remedy changes — Section 301, Section 232, and anti-dumping duties are updated periodically. A rate that was correct last quarter may have changed
- Consult CBP resources — for binding classification rulings, CBP's National Commodity Specialist Division provides written determinations
Frequently Asked Questions About HTS 721430
What is the import duty rate for products under HTS 721430?
Duty rates for HTS 721430 vary by the specific 8- or 10-digit statistical suffix and the country of origin. Suffix 7214.30.00 has a General rate of Free. Always verify the exact duty rate with US Customs and Border Protection before importing, as rates may change and additional trade remedies (Section 301, Section 232, anti-dumping) may apply depending on the country of origin.
Can I get duty-free treatment for goods classified under HTS 721430?
Yes — 1 statistical suffixes under HTS 721430 carry a General rate of Free. Additionally, many products qualify for duty-free treatment under Free Trade Agreements (USMCA, KORUS, and others) even if the General rate is not Free. Check the Special rate column for your specific country of origin. To claim FTA preferences, you must provide the required origin certification documentation.
How do I know if I am using the correct HTS classification?
The correct HTS classification depends on the specific product's composition, function, and in some cases its country of origin. For binding certainty, you can request a written ruling from CBP's National Commodity Specialist Division. Misclassification can result in retroactive duties, penalties under 19 USC §1592, and interest on underpaid amounts. For products classified under heading 721430, the key classification factors include the General Rules of Interpretation (GRI), Section Notes, and Chapter Notes. When in doubt, consult a licensed customs broker.
HTS Chapter 72 Classification Guide: Iron and Steel
Chapter 72 covers iron and steel products from primary forms (pig iron, ferroalloys, ingots) through semi-finished products (slabs, billets, flat-rolled) to finished long products (bars, rods, wire, angles, shapes, sections). Classification depends on the product form, steel composition (carbon, alloy, stainless), and processing state (hot-rolled, cold-rolled, coated).
Common Misclassification Errors
- Misclassifying stainless steel under carbon steel headings — stainless steel has separate subheadings and different duty rates
- Confusing hot-rolled and cold-rolled flat products — they have separate subheadings, and cold-rolled products typically face higher duty rates
- Failing to account for Section 232 (25% additional duty) and ADD/CVD, which can triple the effective duty rate on certain steel products
Duty Calculation Tips for HTS 721430
Steel imports face Section 232 tariffs of 25% (with country-specific exemptions for Australia, Argentina, Brazil, South Korea quota, Canada/Mexico USMCA). Anti-dumping duties on hot-rolled steel from China, India, Japan, and others range from 15-90%. Verify mill test certificates for country-of-origin claims. The USMCA melt-and-pour rule requires steel to be initially produced in a USMCA country.
Chapter 72 Frequently Asked Questions
What is the Section 232 tariff on steel imports?
Section 232 imposes a 25% additional duty on most steel products under Chapters 72 and 73, effective since 2018. Country exemptions include Australia, Argentina, Brazil (unlimited), South Korea (quota-limited), and Canada/Mexico (USMCA). Derivative steel products were added in 2024.
What is the USMCA melt-and-pour rule for steel?
Under USMCA, steel must be 'melted and poured' (initially produced from raw materials) in a USMCA country to qualify for preferential duty rates. Simply rolling or cutting imported steel slabs in Mexico or Canada does NOT confer USMCA origin. CBP has denied USMCA claims on steel where the slab was imported from a non-USMCA country.
Which countries face anti-dumping duties on steel?
Anti-dumping duties on steel products cover many countries: China, India, Japan, South Korea, Russia, Turkey, Ukraine, Vietnam, and others. ADD rates are company-specific and range from 15% to over 200%. Check the Commerce Department's active orders for your specific product and supplier.
How do I verify country of origin for steel imports?
Request mill test certificates (MTCs) from your supplier that identify the mill location, steel grade, and production date. CBP requires documentation of where the steel was melted and poured. Transshipment through third countries to evade Section 232 or ADD is aggressively investigated under CBP's EAPA program.
Are there product exclusions from Section 232 steel tariffs?
Yes. CBP maintains a list of specific HTS subheadings and products excluded from Section 232. Some exclusions are company-specific (granted to individual firms), while others are product-wide. Check the current exclusion list on the Commerce Department website before applying Section 232 duties.
This HTS classification data is programmatically parsed from the official 2026 US International Trade Commission (USITC) Harmonized Tariff Schedule Revision 9. The PoliteDraft data engine aggregates 8-digit and 10-digit statistical suffixes under their 6-digit subheading parents to create comprehensive, data-rich reference pages. Our editorial team reviews data parsing accuracy against the official USITC source files. This database is provided for informational and preliminary research purposes only. PoliteDraft is not a licensed customs broker or legal advisor.
Related HTS Codes in This Section
Trade & Compliance Insights for Chapter 72
Expert analysis on tariff policy, trade remedies, and compliance strategies relevant to HTS 721430.
Complete guide to Section 232 national security tariffs on steel (25%) and aluminum (10%). Country exemptions, product exclusions,...
Section XVI Tariff Guide: Machinery, Electronics & Electrical Equipment — 2026 HTS Import DutiesComplete tariff guide for US importers of industrial machinery, electronics, and electrical equipment (HTS Section XVI, Chapters 84-85)....
Section XV Tariff Guide: Steel, Aluminum & Base Metals — 2026 HTS Import Duties, Section 232 & Anti-DumpingComplete tariff guide for US importers of steel, aluminum, copper, and base metal products (HTS Section XV, Chapters 72-83). Covers...
Browse All HTS Codes in This Section
See the complete list of HTS subheadings under the same section as 721430.
View Section Overview →