HTS Code 392690: Other: — 2026 US Tariff Rates
Data sourced from USITC 2026 Harmonized Tariff Schedule · Last verified May 31, 2026
Quick Answer
HTS 392690 = Other:
Duty rate: 3.4% · Unit: 39-digit · Column 1: 3.4%
About This HTS Subheading
This 6-digit Harmonized Tariff Schedule subheading (392690) covers other:. The table below lists all 8-digit and 10-digit statistical suffixes under this subheading, including General, Special (Free Trade Agreement), and Column 2 duty rates. Data is sourced from the official USITC 2026 Harmonized Tariff Schedule Revision 9. Always verify final classifications and duty rates with US Customs and Border Protection (CBP) before importing.
Complete Classification Table
All 8-digit and 10-digit tariff codes under HTS subheading 392690. Use this table to find the correct statistical suffix and applicable duty rate for your product.
| HTS Code | Full Description | General Rate | Special Rate | Column 2 Rate |
|---|---|---|---|---|
3926.90.10.00 |
Buckets and pails | 3.4% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 80% |
3926.90.16.00 |
Pacifiers | 3.1% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 25% |
3926.90.21.00 |
Ice bags; douche bags, enema bags, hot water bottles, and fittings therefor; invalid and similar nursing cushions; dress shields; pessaries; prophylactics; bulbs for syringes; syringes (other than hypodermic syringes) and fittings therefor, not in part of glass or metal | 4.2% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 25% |
3926.90.25.00 |
Handles and knobs, not elsewhere specified or included, of plastics | 6.5% | Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 57.5% |
3926.90.30.00 |
Parts for yachts or pleasure boats of heading 8903; parts of canoes, racing shells, pneumatic craft and pleasure boats which are not of a type designed to be principally used with motors or sails | 4.2% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 30% |
3926.90.33.00 |
Handbags | 6.5% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 60% |
3926.90.35.00 |
Other | 6.5% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 60% |
3926.90.40.00 |
Imitation gemstones | 2.8% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 20% |
3926.90.45 |
Gaskets, washers and other seals | 3.5% | Free (A,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 25% |
3926.90.45.10 |
O-Rings | — | — | — |
3926.90.45.90 |
Other | — | — | — |
3926.90.48.00 |
Photo albums | 3.4% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 80% |
3926.90.50.00 |
Frames or mounts for photographic slides | 3.8% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 45% |
3926.90.55.00 |
V-belts | 5.1% | Free (A+,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 30% |
3926.90.56.00 |
With textile components in which vegetable fibers predominate by weight over any other textile fiber | 5.1% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 30% |
3926.90.57.00 |
With textile components in which man-made fibers predominate by weight over any other textile fiber | 6.5% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 74% |
3926.90.59.00 |
Other | 2.4% | Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 25% |
3926.90.60 |
Other | 4.2% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 25% |
3926.90.60.10 |
Synchronous belts | — | — | — |
3926.90.60.90 |
Other | — | — | — |
3926.90.65 |
Spring type | 4.2% | Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 8.4% |
3926.90.65.10 |
Valued not over 80 cents per gross | — | — | — |
3926.90.65.20 |
Valued over 80 cents but not over $1.35 per gross | — | — | — |
3926.90.65.30 |
Valued over $1.35 but not over $1.70 per gross | — | — | — |
3926.90.65.50 |
Valued over $1.70 per gross | — | — | — |
3926.90.70.00 |
Other | 5.3% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 80% |
3926.90.75.00 |
Pneumatic mattresses and other inflatable articles, not elsewhere specified or included | 4.2% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 25% |
3926.90.77.00 |
Waterbed mattresses and liners, and parts of the foregoing | 2.4% | Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 25% |
3926.90.83.00 |
Empty cartridges and cassettes for typewriter and machine ribbons | 5.3% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 80% |
3926.90.85.00 |
Fasteners, in clips suitable for use in a mechanical attaching device | 6.5% | Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 60% |
3926.90.87.00 |
Flexible plastic document binders with tabs, rolled or flat | 5.3% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 80% |
3926.90.94.00 |
Cards, not punched, suitable for use as, or in making, jacquard cards; Jacquard cards and jacquard heads for power-driven weaving machines, and parts thereof; and Transparent sheeting of plastics containing 30 percent or more by weight of lead | Free | — | 80% |
3926.90.96.00 |
Casing for bicycle derailleur cables; and casing for cable or inner wire for caliper and cantilever brakes, whether or not cut to length | Free | — | 25% |
3926.90.99 |
Other | 5.3% | Free (A,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 80% |
3926.90.99.05 |
Elastic bands made wholly of plastics | — | — | — |
3926.90.99.10 |
Laboratory ware | — | — | — |
3926.90.99.25 |
Reflective triangular warning signs for road use | — | — | — |
3926.90.99.30 |
Ladders | — | — | — |
3926.90.99.40 |
Covers, rings and frames for manholes; catch basins; drainage gates and frames thereof; cleanout covers and frames thereof; valve, service and meter boxes | — | — | — |
3926.90.99.50 |
Face masks and shields, medical positioning or transport pads, medical waste containers or disinfectant wipes dispensers | — | — | — |
3926.90.99.87 |
Rigid tubes or pipes suitable for use as electrical conduit | — | — | — |
3926.90.99.89 |
Other | — | — | — |
Duty Estimator
Enter your product value to estimate the import duty. This is an estimate only — actual duties are assessed by CBP at the port of entry.
Quick Answer: HTS 392690 Duty Rates
HTS subheading 392690 (other:) contains 42 sub-classifications.
2 suffixes carry duty-free General rates.
Suffix 3926.90.10.00: General rate 3.4%, Special (FTA): Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG).
Suffix 3926.90.16.00: General rate 3.1%, Special (FTA): Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG).
Suffix 3926.90.21.00: General rate 4.2%, Special (FTA): Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG).
Always verify with CBP — Section 301, Section 232, and ADD/CVD may apply.
What Importers Need to Know About HTS Chapter 39
This subheading falls under an HTS chapter covering plastics and plastic articles including raw polymers, films, sheets, tubes, packaging, household articles, and construction products. Importers of these products should be aware of the following trade compliance considerations:
Many plastic products qualify for duty-free treatment under multiple FTAs. Verify country of origin for polymer resins vs. finished articles — they may differ under the substantial transformation test.
For the specific subheading HTS 392690, we recommend you:
- Verify the correct 10-digit statistical suffix — even within a 6-digit subheading, duty rates can differ significantly between suffixes
- Check FTA eligibility — if your product qualifies for preferential treatment under USMCA, KORUS, or another FTA, you may reduce or eliminate duties by providing the required origin certification
- Monitor for trade remedy changes — Section 301, Section 232, and anti-dumping duties are updated periodically. A rate that was correct last quarter may have changed
- Consult CBP resources — for binding classification rulings, CBP's National Commodity Specialist Division provides written determinations
Frequently Asked Questions About HTS 392690
What is the import duty rate for products under HTS 392690?
Duty rates for HTS 392690 vary by the specific 8- or 10-digit statistical suffix and the country of origin. Suffix 3926.90.10.00 has a General rate of 3.4% with Special (FTA) rates available: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG). Suffix 3926.90.16.00 has a General rate of 3.1% with Special (FTA) rates available: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG). Suffix 3926.90.21.00 has a General rate of 4.2% with Special (FTA) rates available: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG). Always verify the exact duty rate with US Customs and Border Protection before importing, as rates may change and additional trade remedies (Section 301, Section 232, anti-dumping) may apply depending on the country of origin.
Can I get duty-free treatment for goods classified under HTS 392690?
Yes — 2 statistical suffixes under HTS 392690 carry a General rate of Free. Additionally, many products qualify for duty-free treatment under Free Trade Agreements (USMCA, KORUS, and others) even if the General rate is not Free. Check the Special rate column for your specific country of origin. To claim FTA preferences, you must provide the required origin certification documentation.
How do I know if I am using the correct HTS classification?
The correct HTS classification depends on the specific product's composition, function, and in some cases its country of origin. For binding certainty, you can request a written ruling from CBP's National Commodity Specialist Division. Misclassification can result in retroactive duties, penalties under 19 USC §1592, and interest on underpaid amounts. For products classified under heading 392690, the key classification factors include the General Rules of Interpretation (GRI), Section Notes, and Chapter Notes. When in doubt, consult a licensed customs broker.
HTS Chapter 39 Classification Guide: Plastics and Articles Thereof
Chapter 39 covers plastics from raw polymer resins through semi-finished products (films, sheets, tubes) to finished plastic articles. Classification follows a manufacturing-stage hierarchy: primary forms (3901-3914), waste/parings/scrap (3915), semi-finished forms (3916-3921), and finished articles (3922-3926). The polymer type determines classification at the primary form stage.
Common Misclassification Errors
- Classifying finished plastic articles under the raw polymer heading instead of the finished article heading (3922-3926) — the HTS distinguishes between raw materials and manufactured goods
- Confusing plastic films (3919-3920) with plastic sheets (3921) — thickness and self-adhesive properties determine the correct heading
- Misidentifying copolymers — the HTS classifies copolymers under the monomer component that predominates by weight, which may differ from the common name
Duty Calculation Tips for HTS 392690
Most plastic raw materials enter at low MFN rates (0-6.5%). Many finished plastic articles also qualify for duty-free treatment under FTAs. Check whether your product qualifies for ITA duty-free treatment if used in electronics. Section 301 List 3 (25% additional duty) applies to many Chinese-origin plastic articles. Consider sourcing from FTA countries to avoid Section 301 surcharges.
Chapter 39 Frequently Asked Questions
How are plastic copolymers classified under HTS Chapter 39?
Copolymers are classified under the subheading of the monomer component that predominates by weight. For example, if an ethylene-vinyl acetate copolymer contains more ethylene than vinyl acetate by weight, it classifies under the ethylene copolymer subheading (3901), not the vinyl acetate subheading.
Are plastic packaging materials subject to Section 301 tariffs?
Many plastic packaging materials from China are subject to Section 301 List 3 additional duties of 25%. Check the specific HTS subheading and country of origin. Sourcing from non-Section-301 countries or FTA partners can eliminate this surcharge.
What is the difference between plastic film and plastic sheet under the HTS?
Film and sheet are distinguished by thickness and intended use. Self-adhesive films fall under heading 3919, non-self-adhesive films and foil under 3920, and other flat shapes (including thicker sheets) under 3921. The distinction matters because duty rates differ between these headings.
Do plastic raw materials qualify for duty-free FTA treatment?
Many plastic raw materials (primary forms under headings 3901-3914) qualify for duty-free treatment under USMCA, US-Korea FTA, US-Singapore FTA, and other FTAs. The origin rule typically requires that the polymer was produced from monomers in an FTA country.
How do I classify 3D printer filament under the HTS?
3D printer filament (PLA, ABS, PETG) is classified as a primary form of plastic under headings 3901-3914 based on the polymer type. PLA (polylactic acid) falls under heading 3907 (acrylic polymers/polyesters). ABS falls under 3903 (polymers of styrene). The filament form does not change the primary form classification.
This HTS classification data is programmatically parsed from the official 2026 US International Trade Commission (USITC) Harmonized Tariff Schedule Revision 9. The PoliteDraft data engine aggregates 8-digit and 10-digit statistical suffixes under their 6-digit subheading parents to create comprehensive, data-rich reference pages. Our editorial team reviews data parsing accuracy against the official USITC source files. This database is provided for informational and preliminary research purposes only. PoliteDraft is not a licensed customs broker or legal advisor.
Related HTS Codes in This Section
Trade & Compliance Insights for Chapter 39
Expert analysis on tariff policy, trade remedies, and compliance strategies relevant to HTS 392690.
View all insights →Browse All HTS Codes in This Section
See the complete list of HTS subheadings under the same section as 392690.
View Section Overview →